Insert scaffolding pole - if couplings are available

VERSION SCAFFMAX 2021

Description

With this function you can insert a scaffolding pole on existing couplings. If the scaffolding pole exceeds a certain length, you can select a length for the sections.

Prerequisites

• The folders ..\sc2021\sc_systems\Generic\components-2020 and components-c must exist.
• A scaffolding system with (free) couplings must be available.

Steps

1. Click on Advanced features in the scaffmax command bar.
    The scaffmax functions dialog is displayed.
   
2. Double-click the line Scaffolding pole - ... if couplings are available.
    A blue crosshair hangs on the cursor.
3. Snap to a coupling, e.g. at a passage.
    The starting point for the pole is set.
   
4. Move the cursor towards the target point.
    The pole is indicated as a blue line.
   
5. Click on the desired location.
    The pole is drawn.
   
6. If the length of the scaffolding pole used is greater than 6 m, you must select the length of the sections in a dialog.
    The Define the scaffold rod dialog is displayed.
    If you require other lengths, these must be adapted in the appropriate folder (see prerequisites).
   
7. Double-click the line with the length you want. 
    The Define the scaffold rod dialog is closed.

Result

You have inserted a scaffolding pole to existing couplings.