Insert scaffolding pole - on any axes and edges

VERSION SCAFFMAX 2021

Description

With this function you can insert a scaffolding pole at almost any point on the scaffolding. If the scaffolding pole exceeds a certain length, you can select a length for the sections.

Prerequisites

• The folders ..\sc2021\sc_systems\Generic\components-2020 and components-c must exist.
• A scaffolding system with components that have snap axes as attributes must be available.

Steps

1. Click on Advanced features in the scaffmax command bar.
    The scaffmax functions dialog is displayed.
   
2. Double-click the line Scaffolding pole - ... on any axes and edges.   
    A blue crosshair hangs on the cursor.
3. Snap to any axis or edge.
    The starting point for the pole is set.
   
4. Move the cursor towards the target point.
    The pole is indicated as a blue line.
   
5. Click on the desired location.
    The pole is drawn.
   
6. If the length of the scaffolding pole used is greater than 6 m, you must select the length of the sections in a dialog.
    The Define the scaffold rod dialog is displayed.
    If you require other lengths, these must be adapted in the appropriate folder (see prerequisites).
   
7. Double-click the line with the length you want. 
    The Define the scaffold rod dialog is closed.

Result

You have inserted a scaffolding pole including couplings.