^{» For older versions click here. «}

Description

Scaffolding can be supplemented with your own assemblies. An instance name can be assigned for each inserted module for further differentiation.
Your own assemblies are displayed in the material list on a separate tab and are also included in the reports.

Example

The assembly ABC consists of its own parts EB1 and EB2 as well as 2 scaffolding parts XX-1 and XX-2 (from the scaffolding system XX).
The assembly is inserted 3 times in the drawing.
The following is displayed in the material list:

Scaffolding system XX tab:
Number XX-1 = 6 and XX-2 = 6
Own components tab:
Number EB1 = 3 and EB2 = 3
Assemblies tab:
Number ABC = 3

Prerequisites

Your own assemblies are available as components (see Create own assembly).

Steps

From the command bar, click Open list of items.
The item list is displayed.
Under Scaffolding Systems, select user.
Your own components and assemblies are displayed.
If your components are not displayed, check the settings Representation of the components and Language scaffolding systems (see Settings > scaffolding system).
If necessary, filter the item list by components or assemblies (Product groups) and by specific search terms (Filter).
For more information, see Open article list of items.
Select an assembly with the right mouse button.
The line is highlighted in yellow.
You can also select the assembly with the left mouse button and dock it to other components if the assembly has its own click points.
Position the assembly in the drawing and click the left mouse button.
The assembly is placed and selected in the drawing.
In the default tray in the Entity Info section, enter a name in the Instance field, e.g. South.
If you only insert one assembly into the drawing, you do not need to enter anything here.
Click on Material list in the command bar.
A scaffold must be available so that the material list can be displayed.
Click the Own components tab.
Select a line to highlight an assembly in the drawing.
If you have inserted your own assembly into the drawing several times, you can distinguish between them using the instance designation.

Result

You have inserted your own assemblies in the drawing. The assemblies are displayed in the material list and are also included in the reports.

Older program versions

scaffmax 2021

Description

Scaffolding can be supplemented with your own assemblies. An instance name can be assigned to each inserted assembly to further differentiate it.
Your own assemblies are displayed in a separate tab in the material list and are also included in the reports.

Example

The assembly ABC consists of its own parts EB1 and EB2 as well as 2 scaffolding parts XX-1 and XX-2 (from the scaffolding system XX).
The assembly is inserted 3 times in the drawing.
The following is displayed in the material list:

Scaffolding system XX tab:
Number XX-1 = 6 and XX-2 = 6
Own components tab:
Number EB1 = 3 and EB2 = 3
Assemblies tab:
Number ABC = 3

Prerequisites

Your own assemblies are available as components (see Create own assembly).

Steps

In the default tray, open the Components section.
Open the folder with your own assemblies (in the standard sc2021\sc_systems\user\userparts).
Drag and drop your own assembly into the drawing.
The assembly hangs on the cursor.
Position the assembly in the drawing.
The assembly is placed and selected in the drawing.
In the default tray in the Entity Info section, enter a name in the Instance field, e.g. South.
If you only insert one assembly into the drawing, no entry is required here.
Click on Material list in the command bar.
A scaffold must be available so that the material list can be displayed.
Click the Assemblies tab.
Select a line to highlight an assembly in the drawing.
If you have inserted your own assembly into the drawing several times, you can distinguish between them using the instance designation.