VERSION SCAFFMAX 2021
The WallData dialog can be called up with the Define Scaffold function. In the dialog, the extensions of a wall can be defined, which are subdivided into the areas of top level, intermediate level, basic level and climp. The available extensions vary depending on the scaffolding system:
Extensions
| Setting | Description |
|---|---|
Klicken Sie auf das Plus-Zeichen vor einer Option, um diese zu erweitern. Bestätigen Sie eine Auswahl, indem Sie auf den entsprechenden Kreis klicken. Wenn Sie Innenkonsolen oder Zwischenlagen auswählen, müssen Sie den Wandabstand in den Basisdaten ändern. Der Leitergang oder Treppenaufgang wird auch bei den Basisdaten definiert. | |
| Top Level | The top layer of the scaffold (including the top deck). |
| Intermediate level | All scaffold layers between top level and basic level, adding one deck to each top layer. |
| Basic level | The complete bottom (height 2m) layer of the scaffold plus any compensation layers (height < 2m) plus the entire substructure with sole boards and shanks. Note PassageFor some scaffolding systems, passages are available, e. g. Ulma Dorpa or Graf.
When aligning the layer heights of two walls, the following must be observed: The position of the layers can be defined with a distance from the eaves or from the ground. All layers created have a distance of 2 m from one another. In the case of passages, the wall is always defined 'from the ground'. In this case, the program calculates: value of ground + height of passage + n * 2 m for the following layers. Thus, the program saves a calculated value 'from eaves' for positioning. With this information it is now easy to understand that adjusting the layer height of an adjacent wall can only work if the distance in this wall is defined as 'from the eaves'. |
| Climb | The type of climb, e.g. the inside ladder access. |
