^{» For older versions click here. «}

Description

Scaffolding can be supplemented with your own assemblies. An instance name can be assigned to each inserted assembly to further differentiate it.
Your own assemblies are displayed in a separate tab in the material list and are also included in the reports.

Example

The assembly ABC consists of its own parts EB1 and EB2 as well as 2 scaffolding parts XX-1 and XX-2 (from the scaffolding system XX).
The assembly is inserted 3 times in the drawing.
The following is displayed in the material list:

• Scaffolding system XX tab:
  Number XX-1 = 6 and XX-2 = 6
• Own components tab:
  Number EB1 = 3 and EB2 = 3
• Assemblies tab:
  Number ABC = 3

Prerequisites

• Your own assemblies are available as components (see Create own assembly).

Steps

1. In the default tray, open the Components section.
   
   
2. Open the folder with your own assemblies (in the standard sc2021\sc_systems\user\userparts).
3. Drag and drop your own assembly into the drawing.
    The assembly hangs on the cursor.
4. Position the assembly in the drawing.
    The assembly is placed and selected in the drawing.
   
5. In the default tray in the Entity Info section, enter a name in the Instance field, e.g. South.
    If you only insert one assembly into the drawing, no entry is required here.
6. Click on Material list in the command bar.
    A scaffold must be available so that the material list can be displayed.
7. Click the Assemblies tab.
   
8. Select a line to highlight an assembly in the drawing. 
    If you have inserted your own assembly into the drawing several times, you can distinguish between them using the instance designation.
   

Result

You have inserted your own assemblies in the drawing. The assemblies are displayed in the material list and are also included in the reports.