^{» For older versions click here. «}

Description

Scaffolding can be supplemented with your own parts. For each inserted part an instance name can be assigned to further differentiate it.
Your own parts are displayed in a separate tab in the material list and are also included in the reports.

Prerequisites

• Your own parts are available as components (see Create own part).

Steps

1. In the default tray, open the Components section.
   
   
2. Open the folder with your own parts (in the standard sc2021\sc_systems\user\userparts).
3. Drag and drop your own part into the drawing.
    The part hangs on the cursor.
4. Position the part in the drawing.
    The part is placed and selected in the drawing.
   
5. In the default tray in the Entity Info section, enter a name in the Instance field, e.g. South.
    If you only insert one part into the drawing, you do not need to enter anything here.
6. Click on Material list in the command bar.
    A scaffold must be available so that the material list can be displayed.
7. Click the Own components tab.
   
8. Select a line to highlight a part in the drawing. 
    If you have inserted your own part into the drawing several times, you can distinguish between them using the instance designation.
   

Result

You have inserted your own parts in the drawing. The parts are displayed in the material list and are also included in the reports.

Anker
scaffmax21 scaffmax21